How to Configure Your Wi-Fi Router for the First Time

Configure your wifi router

Organizing your new Wi-Fi router shouldn’t be as difficult as it sounds. This complete information will stroll you thru the entire means of configuring your Wi-Fi router for the primary time step-by-step.  

After getting discovered and acquiring the router that you just need in keeping with your necessities, all you should do is comply with these directions to set it up.  

Half 1: Join the {Hardware} 

  • Connecting Your Router to the Modem:

  1.  So as to share your web connection with a number of gadgets, you could join your router to the modem. Virtually, place your router close to the modem.  
  2. Join each modem and the router with an Ethernet cable.  
  3. You need to connect the modem to the Web port/ WAN in your router.  
  • Connecting Your Units with Ethernet: 

  1. For a quicker and higher connection, connect your computer systems, TV, or online game console to the router by way of Ethernet instantly. This gained’t require any additional configuration steps.  
  2. To regulate your router settings, you could join at the very least one pc by way of Ethernet, if not all gadgets.  
  3. After getting adjusted the router settings, you may disconnect this machine later.  

Connect your router 

Half 2: Configure Your Router 

  •  Discovering the Router’s IP Tackle: 

  1. To find out the default IP deal with the router, look at the label or the field that it got herein.  
  2. In the event, you can’t discover it anyplace, seek the router’s mannequin on the net.  
  • Adjusting the Settings: 

  1. Open a browser on the machine linked to the router by way of Ethernet.  
  2. Enter the IP deal with the router and search. 
  3. Your browser will robotically try to connect with the configuration menu of the router.  
  • Getting into Your Username and Password: 

  1. To change the settings, you could first enter the configuration web page.  
  2. To take action, be on the router’s IP deal.  
  3. Enter a legitimate password and username 
  4. Yow will discover it on the router or in the documentation 
  • Adjusting the Wi-fi Settings: 

  1. After you log in to your router, you will notice an important menu or display 
  2. The web part is normally left at default settings.  
  3. Within the wi-fi part, enter a customized identify on your router within the SSID 
  4. Select the safety technique WPA2-PSK as it’s the hardest to crack and extremely safe.  
  5. After you select your safety technique, enter a tough however rememberable password.  
  6. After getting finalized all of the settings, click on Apply to avoid wasting your settings.  
  7. The router will take a couple of minutes to complete resetting after which your router will probably be enabled.  
  • Blocking Undesirable Websites: 

  1. To avoid wasting your gadgets on undesirable websites, you may block your community from accessing them.  
  2. Go to the Safety/ Block part of the router to limit undesirable websites.  
  3. Sort within the domains or key phrases of the websites to dam them.

Leave a Reply

Your email address will not be published. Required fields are marked *